Infrared Radiant Heating for Commercial / Industrial Applications
commercial / industrial > products > tube heater - RSTP Series
Available in capacities of 150,000 and 175,000 Btu/hr, these compact heaters are completely factory assembled and may be mounted at various heights, horizontally or up to an angle of 90°. These powerful units incorporate many of the features standard for other Space-Ray tube heaters and are especially suited for higher mounting heights.
This series meets a wide range of comfort heating needs, indoors or outdoors.
|
RSTP Infrared Heater (PDF) |
I&O
RSTP Series (PDF) |
Other
Major Types of |
Features
Industry's Workhorse Heater Since 1968 The Original Unitized Infrared Tube Heater Design Certified by A.G.A. Rugged Body Construction Completely Factory Assembled and Tested Saves Installation Time & Money Proven In High Bay Installations - as High as 68' Above The Floor Ideal For Large Buildings, Aircraft Hangars, Warehouses, Steel Mills, And Other - Hard-to-Heat Industrial Heating Applications Certified For Indoor and Outdoor Installations High Radiant Efficiency
Pull-Through System
Pull-Through System (vacuum) -- The Products of Combustion are Pulled Through - The Combustion Chamber For Increased Radiant Efficiency and Greater Safety Each Unit is Equipped with An Individual Draft Inducer for Maximum Venting Flexibility Vented, Common Vented, or Indirect Vented Operation Draft Inducer is Equipped with Permanently Lubricated, Totally Enclosed, Fan-Cooled and Heavy Duty Ball Bearing Motor to Minimize Field Maintenance
Radiant Emitter Tube System
Highest Radiant Efficiency Tube Heaters. Tube Temperatures Average 900°F 16 Gauge 4" O.D. Calorized Aluminized Steel Emitter Tubes For Long Life, Corrosion - Resistance, And High Radiant Efficiency -- Will Not Flake Or Peel. The Calorization Process Produces An Emitter Tube Which Is Highly Radiant - Absorptive On The Interior And Highly Radiant Emissive On The Exterior
Reflector System
Highly Efficient Aluminum Reflectors Designed For Uniform Floor Level Radiant Energy Distribution. Suitable For Horizontal Or Angle Mount Up To 90 Degrees. Reflector Ends Are Enclosed For Maximum Radiant Heat Output And Minimum Convection Loss
Burner System
One-Piece Cast Iron Burner With Stainless Steel Flame Retainer. Inside Or Outside Air For Combustion Spark Ignition System With 100% Gas Shut-Off Safety Control (30-Second Pre-Purge); Diaphragm Air Proving Switch; Burner Inspection Sight Glass; Monitoring Light System For On-Line Diagnosis
(Water Column)
(Water Column)RSTP15C-N5D
NATURAL
150,000
3.5"
4.5" - 14"
120 VAC
60 HZ
2.6 AMPS
60 HZ
2.6 AMPS
60 HZ
2.6 AMPS
NOTE: The clearances specified above must be maintained to combustibles and other materials that may be damaged by temperatures 90ºF above ambient temperature. Clearances to combustibles are posted on the reflector near the control end of the heater. In locations used for storage of combustible materials where they may be stacked below the heater, NFPA 54 requires that the installer must post signs that will "specify the maximum permissible stacking height to maintain the required clearances from the heater to combustibles".Also, please note that this heater is NOT for residential use.
To request a quote or if you need additional information, please call Space-Ray toll free at 800-438-4936 or send us an email.
Besides this Commercial / Industrial Infrared gas heating product line, other Space-Ray divisions include: Poultry, Construction & Garage
| home | about us | products: industrial / poultry / construction / garage | news2use | contact info. | email us | site map |
© 2006 Copyright — Space-Ray, Division of Gas Fired Products, Inc. — Charlotte, North Carolina USA
International Manufacturer of Infrared Radiant Gas Heaters