Tru40 Series

High-pressure version of the SRB40 model

Home  » Poultry Animal Infrared Heaters » TRU40 Series

Features

  • Stainless steel emitter assembly, insulated and uninsulated - will not crumble or distort. Features 3-year limited warranty.
  • Stainless steel, corrosion resistant burner assembly features simple disassembly for easy cleaning and maintenance.
  • Stainless steel main burner gas line for strength and durability.
  • Large deep dish aluminum canopy to efficiently reflect heat to litter area where it's needed most.
  • Ignition Control features a moisture resistant enclosure.
  • Safety pan below burner helps shield litter area directly beneath brooder.
  • Low profile mounting bracket permits easy leveling of brooder.
  • No filter needed
  • Ideal for replacement of existing high pressure brooders

RADIANT HEAT VS FORCED AIR

Radiant vrs Forced Air
 

Unique 60° Emitter Angle Puts More Radiant Heat Into Primary Brood Area
No other radiant gas brooder can provide more radiant heat to the floor of your poultry house than Space-Ray. Our specially designed 60° emitter angle, combined with our deep dish canopy, produces an optimum heat pattern in the primary brood area. This large radiant heat pattern means that fewer brooders are required in each house resulting in fuel savings.

Space-Ray's Unique 60° Emitter Angle is specifically designed to aim the radiant heat directly at the birds where it's needed most

Radiant vrs Forced Air

  • Low profile mounting bracket permits easy leveling of brooder
  • Large deep dish canopy to efficiently reflect heat to litter area where it is needed most
  • The stainless emitter assembly is fully insulated and enclosed. It features a full 3-year limited warranty
  • The burner assembly with durable cast iron cap features large burner ports for more even heat distribution and years of trouble free service
  • The safety pan helps to shield litter area directly beneath the brooder
  • Has a stainless steel main burner gas line for strength and durability
  • The direct spark ignition model's 3-try direct spark ignition is in a moisture resistant enclosure for added reliability

Maintenance Friendly

Quick Release Burner Brooder Heater Quick Release Burner Brooder Heater Quick Release Burner Chicken Heater
Model BTU/HR Input Brooder Spacing Min Mounting
Height
Ventilation
Required*
Gas
Consumption
Tru40-L5 40,000 25-40' 62-72" 200 CFM LP   .43 GPH
Tru40-N5 40,000 25-40' 62-72" 200 CFM NG  .40 THERM
*Per Brooder
Control Suffix Gas Type Control Option Description
N5/L5 Natural/Propane A 3-try direct spark ignition control for single or multi-zone installations.  A 110 volt power supply is required.  Zone control panel (Part No. 43619050) and/or 110 volt thermostat, computer or environmental controller is required.  For individual control, a unique thermostat (Part No. 43317050) is available.
Model Control Type BTU/HR Input Canopy Diameter Brooder Height Shipping Weight
Tru40 Direct Spark 40,000 35" 18" 28 lbs.
Gas Type Control Type Burner Pressure Supply
Pressure Min
Supply
Pressure Max
Voltage Amps
Natural #5 Direct Spark 4"wc 5"wc 14"wc 24 VAC 0.8
Propane #5 Direct Spark 10"wc 11"wc 14"wc 24 VAC 0.8

MINIMUM CLEARANCES TO COMBUSTIBLES

Model Sides Ceiling Below
Tru40 36" 18" 48"
Power Inverter Kit (for battery back-up), Part #43619070

This provides temporary 120VAC to the brooder zone control (power supply) panel during power outages. The kit includes a batter trickle charger, changeover relay and power inverter to convert 12 volt DC into 120 volt AC.

 
Thermostat – Environmental (EW-4-20), Part #30525010

Ratings: SPDT 120/240VAC, 16A full load
Temperature range: -40° F to 104° F +/- 2.5° F differential
Housing: Watertight ABS plastic meets NEMA 4x and NEC Article 547-4 requirements for use in harsh environments.
Adjustable dial allows thermostat to be recalibrated.

Thermostat – Environmental (EW-4-20), Part #30525010
click to enlarge
Thermostat – Individual, Part #43317050 (for No. 5 Control only)

Temperature range: 58° F to 122° F with (10) temperature scale ranges. The thermostat is used to control individual brooders for Turkey heating applications. Includes Mears thermostat, plastic enclosure, bracket and screws to mount to Honeywell #VR8205 gas valve.

Thermostat – Individual, Part #43317050 (for No. 5 Control only)
click to enlarge
Hose Kit – No. 5 Controls:

1/4" ID x 6ft hose with 9/16-18 LH welding connector x 1/8 male pipe at one end and 1/4" male pipe opposite end, Part #30522290

Each kit includes:

Item No. Part Number Description Qty
1 30285000 Manual Ball Valve 1/2 Female Pipe 1
2 03338100 Bushing, 1/2 x 1/4 Galv. 1
3 30714020 LH Welding Connector 9/16-18 x 1/8 Male Pipe 1
4 03994050 Screen Mesh Gas Filter 1
5 30523290 Hose, 1/4" ID x 6ft with LH Welding Swivel x 1/4 Male Pipe 1
Hose Kits – No. 2 & No. 5 Controls:
click to enlarge
Manual Gas Shut-Off Ball Valve – ½” NPT, Part #30285000

The Deflector Kit (Part # 43504000) is used to reduce clearances to combustibles below the heater. It is designed to be used when the CB series is installed in a horizontal position.

Manual Gas Shut-Off Ball Valve – ½” NPT, Part #30285000
click to enlarge
Wire Brushes

Wire Brush – Long, Part #43295020

Wire Brush – Short, Part #43295010

Wire Brushes
click to enlarge